Pages

Wednesday, April 2, 2014

DIY Easter Banner for our Sense of the Resurrection studies

We will be starting our lessons in a Sense of the Resurrection this week and I wanted to share with you how I made our Easter Banner to go with our lessons.


I went to Joann's with a couple of coupons and got the chevron material and the heat n bond. I had already gotten the felt and ribbon at Walmart.
  I needed a pattern so that my triangles would be straight. I found one on Pinterest of course here

Using the pattern I made, I cut out all of my triangles. I cut out 6 white felt. I then cut out 12 triangles from the chevron material- from those I will make 6 double sided for added durability. I want to be able to use this banner every Easter. 
Once all the triangles were cut is was time to start putting it all together. I did these steps in several different time settings. It is just how my week was going, so I took advantage of small chunks of time. If I added it all up, I would say it would be under 2 hours to complete. Since I wanted to double side the yellow chevron pattern I started with those first. From reading the instructions (on the heat bond package) I cut strips and placed them on the inside of one chevron pattern and ironed it (no steam) in place. I did this to all three sides of the triangle.

Once the paper strips had cooled, I peeled the paper part off and matched up another chevron triangle on top with the outside of the material facing up. I then ironed it fusing both pieces together. (sorry, I forgot to take a picture of this step) When I had fused all of my chevron triangles together I then had 6 chevron and 6 white felt that I needed to piece together. Along the top of each triangle I iron on a strip of heat n' bond and one by one ironed the matching (gross grain) ribbon to each triangle. 
 Once I was all finished with adhering all 12 to the ribbon I decided that to help it be the most durable I went ahead and ironed on another strip of ribbon to the other side. Putting the ribbon on the both sides also makes it double sided.
Then, because I didn't get the extra hold heat n' bond I did a simple straight stitch on my sewing machine. I don't want it to fall apart next year. So going forward I will remember to get the extra hold stuff (lesson learned).
And that's it! We will actually be adding to the banner in the coming weeks leading up to Easter. Starting tomorrow, we will begin our Easter lessons in our homeschool and I will share what we complete as we go along! Do you have any special Easter lessons planned? Please share. 

linking up at:Faith filled food for moms 

2 comments:

  1. I love banners and this one is adorable.

    ReplyDelete
  2. Thank you. I do love how it turned out. I am looking forward to making more. Thank you for stopping by!

    ReplyDelete